LF-COBSTRIP-2W-IP20 Strip Light

LF-COBSTRIP-2W-IP20: specifications and applications

LF-COBSTRIP-2W-IP20 is the LUMIFLEX COB STRIP 2W IP20 Strip Light lighting model in the lumi flex catalogue, listed under STRIP LIGHT. This page keeps the specifications, configuration choices and project notes for LF-COBSTRIP-2W-IP20 together, so it can be compared with other COB STRIP models without substituting the dimensions or options of a neighbouring article.

The LF-COBSTRIP-2W-IP20 catalogue record lists power: 2.5W. Coordinate this load with the circuit schedule and the selected control gear.

The LF-COBSTRIP-2W-IP20 catalogue record lists colour temperature: 2700, 3000, 4000, 5000, 6000, 6500. Compare the listed colour choices with finishes, surrounding light and the intended atmosphere.

The LF-COBSTRIP-2W-IP20 catalogue record lists optical distribution: 120°. Compare the listed option with target distance, spacing and the surface being illuminated.

The LF-COBSTRIP-2W-IP20 catalogue record lists enclosure rating: IP20. Coordinate this rating with the actual exposure, cleaning regime and installation conditions.

The LF-COBSTRIP-2W-IP20 catalogue record lists electrical requirement: 24VDC. Keep the stated unit alongside the driver and control specification; a current rating must not be treated as a mains voltage.

The LF-COBSTRIP-2W-IP20 catalogue record lists finish or material: White. Review the stated construction alongside adjoining architectural materials and sample approvals.

Linear lighting can form part of a workplace ceiling, a circulation route, joinery or a continuous architectural reveal. Plan the run around the actual module dimensions and connection details, with accessible control gear and an agreed approach at corners and ends. Compare the illuminated effect on the intended surface rather than using physical length as a substitute for a lighting calculation.

The current record for LF-COBSTRIP-2W-IP20 does not supply a complete list of order-code combinations. Use this base reference when requesting the model schedule, and confirm the exact finish, optical selection, electrical arrangement and included components before an order is specified. Missing options are not presented as available configurations.

For a LF-COBSTRIP-2W-IP20 project submission, retain this model reference with the drawings and the selected configuration. Include the relevant dimensions, optical information and installation requirements in the coordination review. Where a document or value is not available on the page, request the model-specific information from the specification team rather than copying a value from another COB STRIP article.

Main model page: LF-COBSTRIP-2W-IP20