LB5381 Panel Light

LB5381: specifications and applications

LB5381 is the LUMIBRIGHT SVELTE LUMIINDOOR 35W PANEL LIGHT IP40 lighting model in the lumi indoor catalogue, listed under PANEL LIGHT. This page keeps the specifications, configuration choices and project notes for LB5381 together, so it can be compared with other SVELTE models without substituting the dimensions or options of a neighbouring article.

The LB5381 catalogue record lists power: 35W. Coordinate this load with the circuit schedule and the selected control gear.

The LB5381 catalogue record lists body dimensions: 295x1195x10mm. Check the housing against the architectural detail and the space reserved for installation.

The LB5381 catalogue record lists colour temperature: 3000, 4000, 5000. Compare the listed colour choices with finishes, surrounding light and the intended atmosphere.

The LB5381 catalogue record lists colour rendering: 80. Include this catalogue value in the material and display-lighting comparison for the project.

The LB5381 catalogue record lists enclosure rating: IP40. Coordinate this rating with the actual exposure, cleaning regime and installation conditions.

The LB5381 catalogue record lists electrical requirement: 200-240VAC. Keep the stated unit alongside the driver and control specification; a current rating must not be treated as a mains voltage.

The LB5381 catalogue record lists mounting: ceiling-recessed. Check the fixing arrangement and access for installation before finalising the detail.

Hotel circulation, villa interiors and workplace settings need the ceiling arrangement to support the task and the architecture together. Compare the model dimensions, any stated cut-out and the intended distribution before setting out the fittings. Coordinate spacing with the room geometry and use the appropriate optical information for the final calculation rather than treating a nominal wattage as a coverage guarantee.

The current record for LB5381 does not supply a complete list of order-code combinations. Use this base reference when requesting the model schedule, and confirm the exact finish, optical selection, electrical arrangement and included components before an order is specified. Missing options are not presented as available configurations.

For a LB5381 project submission, retain this model reference with the drawings and the selected configuration. Include the relevant dimensions, optical information and installation requirements in the coordination review. Where a document or value is not available on the page, request the model-specific information from the specification team rather than copying a value from another SVELTE article.

Main model page: LB5381