Regulations establish obligations; standards describe assessment methods; a test report records a particular specimen and configuration. None of these, by themselves, proves that a LUMIBRIGHT model complies. Select the destination market and obtain the exact product evidence before approval.
Researched 2026-09-26 · Research guidance — product applicability and technical/legal review required
Great Britain
Electrical safety, EMC and traceability
The Electrical Equipment (Safety) Regulations 2016 cover equipment designed for 50–1,000 V AC or 75–1,500 V DC, subject to exclusions. Assess the complete luminaire/driver assembly and the other applicable regimes, including EMC, RoHS and radio equipment where relevant. Equipment outside that voltage scope is not automatically exempt from other safety obligations. GOV.UK currently recognizes CE or UKCA for the listed GB electrical regimes; requirements and chosen conformity route must still be satisfied.
Evidence to confirm
Exact model and BOM; intended use; applicable legislation/standard editions; risk assessment; technical file; relevant test reports; signed declaration; markings, traceability, instructions and series-production controls. GB electrical-safety guidance requires technical documentation and declaration retention for ten years after placing on the market.
Relevant EU manufactured-goods rules apply in Northern Ireland under the Windsor Framework. Review CE requirements, economic-operator details and any applicable UKNI conditions separately. UKCA alone is not an EU market-access route. Identify the light source, separate control gear and containing product before deciding ecodesign or energy-information obligations; not every luminaire receives the same energy label.
Evidence to confirm
Destination-specific declaration and technical file, applicable ecodesign/energy-information classification, labeling/registration where required, importer details and product instructions.
MoIAT provides conformity certification for products subject to technical regulations. Check the current regulated-products classification and exact product scope rather than assuming one requirement covers every lamp, luminaire and driver. The official service lists a valid trade license and a product report from an accredited laboratory among the application requirements.
Evidence to confirm
Applicable classification, applicant/license details, model-specific accredited-laboratory reports, labels and declaration, and issued certificate scope/status. This page does not claim a LUMIBRIGHT ECAS certificate or authority endorsement.
SASO's IECEE guidance lists lighting and its parts among product categories requiring national recognition. Determine the exact applicable product standard, national differences, technical regulation and shipment route. Energy-efficiency certificates/labels and radio approvals are conditional on product scope, not interchangeable with the safety recognition.
Evidence to confirm
CB test report and certificate from recognized bodies, manufacturer/importer declarations, model photographs and labels, Arabic or Arabic/English instructions, national-difference evidence, and energy-efficiency documents where required. Confirm current conditions with the responsible conformity body before supply.
Start the laboratory scope with IEC/EN 60598-1 and the applicable particular part for the luminaire type. The IEC catalogue publishes IEC 60598-1:2024; the edition recognized by a market or contract must be checked rather than automatically treating the newest publication as mandatory everywhere. Review relevant control-gear, ingress/impact and photobiological-safety assessment requirements with the laboratory.
Evidence to confirm
Tested model, ratings, critical components, mounting and thermal conditions, laboratory identity/accreditation scope, report number, standard edition, specimen photos and deviations. IP does not establish corrosion resistance or suitability for every underwater installation.
ANSI/IES LM-79 addresses optical and electrical measurement of solid-state lighting products. Confirm the applicable published edition with the laboratory and record it in the test brief. Request measured input power, delivered output, intensity distribution and colour quantities for the selected optic, CCT, driver/current and thermal conditions. An IES/LDT file is calculation data, not a safety certificate. Check that its model, configuration, units and revision agree with the supporting report.
Evidence to confirm
Signed report, exact orderable code/BOM, IES or LDT revision, output basis, test conditions and any accessory-dependent changes. Never derive system efficacy from source lumens or a family range.
Ra, saturated-red R9, TM-30 fidelity Rf, gamut Rg, CCT and colour consistency describe different properties. TM-30-24 is an IES method for evaluating colour rendition. Do not infer an unpublished R9, TM-30 or SDCM result from CRI. Material mock-ups should control output, CCT, camera exposure and white balance; images do not replace measured data or physical approval.
Evidence to confirm
Engine/configuration-specific spectral report, conditions, tolerances, sample IDs and controlled original imagery with usage rights.
The DALI Alliance database distinguishes certified DALI-2/D4i components from registered DALI version-1 control gear. Its certification conditions require matching brand, GTIN, hardware/firmware and valid device identity. Luminaires are not listed in that component database. A driver entry does not certify every luminaire/controller combination.
Evidence to confirm
Exact driver/controller codes and database references, hardware/firmware, supply/load limits, protocol, dimming range, flicker/noise tests, commissioning conditions and approved substitution rules.
Part L, CIBSE guidance, BREEAM, WELL and local building requirements concern the relevant design and assessment context. Review the applicable edition, jurisdiction and project brief. A high-CRI luminaire, a protocol name or an IP label does not automatically earn a building credit or prove glare, circadian or lighting-power compliance.
Evidence to confirm
Project calculations and assumptions, approved layouts, exact product files, controls narrative and assessor/consultant acceptance. Do not promise report availability until the file is actually held and matched.
A commercial warranty must identify its guarantor, eligible product codes, territory, term, conditions, exclusions, remedies and claims process. Technical lifetime, spare-part availability and warranty are different commitments. The LUMI PRO collection name does not establish a ten-year warranty. Consumer statutory rights must not be displaced by a voluntary guarantee; business-to-business terms require their own review.
Evidence to confirm
Approved signed/versioned policy, eligible SKU list, effective date, purchase/installation conditions, component coverage, claims contact and commercial/legal approval. No new warranty term is activated by this research.